The special connector fitted to a normal household tap creates a vacuum when the tap is turned on full pressure. (In this mode, the tap water goes to waste down the sink).

This vacuum draws water from the aquarium through a gravel cleaner and into the sink.

Once the required amount of water has been removed from the aquarium, the tap connector can be switched to allow the tap water to refill the tank through the same hose.

Click Here for More Information

The Python No Spill Clean & Fill Water Changer tap connector has a rubber tap adaptor with a circular 3/4" internal centre and is then secured by means of the hose clip supplied. The lower end of the tap adaptor has a screw thread for attaching the Python Clean & Fill main water flow/venturi.

The 20 foot extension comes complete with end fittings.

(Customers please note : since we do not keep a stock of the various house taps on the market on our premises, we regret we are unable to advise on the suitability or otherwise of the Python system with your specific tap version.)

Python Porter™ - water and mildew resistant holder/carrier for up to a 100 Ft. (30m) System. Easy Velcro closure. Keeps tubing coiled properly when not in use.

The standard Python No Spill Clean & Fill System comes with a 10" gravel tube as standard.

But for larger and/or deeper tanks the following extended length gravel tubes are available as accessories.

All gravel tubes are packaged with 2 feet of tubing and a female connector.

Unit comes with 1/2" adaptor attached.
1/4" Adaptor is also included which can be snapped into position in place of the 1/2" hose adaptor

Unit can be easily dismantled for cleaning in case of clogging

Attach gravel tube hose end to the Squeeze Siphon Starter and insert gravel tube into the aquarium

Making sure the Squeeze Siphon Starter bulb is outside but below aquarium water level, squeeze the bulb 1-2 times until water starts flowing

Spares and accessories for the Python Water Changers

Click Here for More Information and parts breakdown images

One piece top quality bulb and large bore hose for emptying and cleaning aquariums and transferring liquids.

Rigid bend fixes over side of aquarium or container leaving both hands free.

Includes On/Off tap

Hose length approx 1 metre