10 inch sediment pre-filter which functions as a first stage filter, removing particles of up to 5 microns from the water whilst also protecting and prolonging the life of the RO Membrane. This pre-filter is enclosed inside transparent filter housing so it is easy to see when the filter needs to be changed.
10" activated carbon block filter which offers the highly effective removal of contaminants such as chlorine and colourants from the water.
High quality Thin Film Composite (TFC) RO membrane, which removes contaminants such as heavy metals and hardness-forming minerals from the water, as well as a high percentage of nitrates and phosphates.
Integral pressure gauge which helps to indicate when the RO membrane may need to be flushed or replaced, ensuring the RO system gives the optimum performance.
Integral flow restrictor/manual flush valve which prevents excess water flow to the RO membrane and allows regular flushing of the RO membrane to prolong its life.
Additional modules are available such as the V²Pure De-ionising Pod which can be added to further enhance the performance of the RO system.
Compact, space-saving design incorporating a strong, metal wall-mounting bracket ensuring quick and simple installation.
Supplied complete with a self-piercing water connector, drain clamp, 6m of ¼" RO flexible tubing (2m white/2m red/2m blue) and a filter housing removal tool.
Models Available:
V²Pure 50 Suitable for producing up to 50 US gal/42 UK gal/190 litres of water per day*
V²Pure 75 Suitable for producing up to 75 US gal/63 UK gal/285 litres of water per day*
V²Pure 100 Suitable for producing up to 100 US gal/84 UK gal/380 litres of water per day*
* Please Note:
RO water production capacities and contaminant rejection rates are based on an ambient temperature of 25°C and a mains water operating pressure of 50 psi (approx. 3.5 bar). Please note that the RO water production capacity and contaminant rejection rates will be reduced at lower ambient temperatures and in areas of lower mains water pressure so this must be taken into account when choosing the correct RO model for your requirements.
Click Here for more information about Reverse Osmosis
To ensure maximum performance from your RO unit the ideal water temperature required is 25c. During the colder months the water temperature drops below the recommended water temperature and you will generally find that RO units will run at about 50% of their stated membrane capacity this affects the water pressure.
Adding a Reverse Osmosis Booster Pump makes sure that you get the maximum stated membrane volume, whether it during the summer or winter months.
The increased pressure that you get by adding an RO Booster Pump also improves the water quality through the membrane. The RO Booster Pumps utilise a transformer to run at low voltage and are suitable for 1/4 inch RO pipe.
Specially Formulated to Recondition R/O, Deionised or Distilled Water
Microbe-Lift R/O Water Conditioner will provide a balanced electrolyte system, as well as a balance of essential salts, magnesium, potassium, and calcium. All of which are an important component to aquatic environments
Dosage :
Add 1-2 capfuls (5-10ml) per 113 litres to purified tank water 1-2 times per week
Reverse Osmosis Spares & Accessories
