Basket

£ 0.00

(0 items)
Shop safe
Shop safe

Python No Spill Clean & Fill

Python NO SPILL CLEAN and FILL Aquarium Maintenance System

 

Python No Spill Clean & Fill Water Changers

Python No Spill Clean & Fill Water Changers
NO SPILL CLEAN and FILL
Aquarium Maintenance System

The special connector fitted to a normal household tap creates a vacuum when the tap is turned on full pressure. (In this mode, the tap water goes to waste down the sink).

This vacuum draws water from the aquarium through a gravel cleaner and into the sink.

Once the required amount of water has been removed from the aquarium, the tap connector can be switched to allow the tap water to refill the tank through the same hose.

Click Here for More Information


The Python No Spill Clean & Fill Water Changer tap connector has a rubber tap adaptor with a circular 3/4" internal centre and is then secured by means of the hose clip supplied. The lower end of the tap adaptor has a screw thread for attaching the Python Clean & Fill main water flow/venturi.



(Customers please note : since we do not keep a stock of the various house taps on the market on our premises, we regret we are unable to advise on the suitability or otherwise of the Python system with your specific tap version.)


Please Note :

These UK versions of the Python No Spill Clean & Fill Water Changers have the Universal Tap Adaptor (Python Part 69A) included in the package

 

Python Extension

Python Extension
If your looking for that extra length in your Python No Spill system so that you can get those water changes done more easily then this is what you need.

This extension available in two sizes lets you easily extend the length of your No Spill Clean and Fill system by Python.

There are two sizes 10 foot and 200 foot and both come complete with one male and one female adapter for easy installation on any size Python.

 

Python No Spill Extended Length Gravel Tubes

Python No Spill Extended Length Gravel Tubes
The standard Python No Spill Clean & Fill System comes with a 10" gravel tube as standard.

But for larger and/or deeper tanks the following extended length gravel tubes are available as accessories.

All gravel tubes are packaged with 2 feet of tubing and a female connector.

Can also be used as "stand-alone" extra length gravel cleaners as hose connection is standard size

Python No Spill Extended Gravel Tube 20inAQ128342 15.49
Price Match
 

Python 06F female connector

Python 06F female connector
Python Female Connector is designed for use with the Python No Spill Clean and Fill systems.

It replaces either of the two female connectors included with your No Spill Clean and Fill system.

Python Female Connector 06F for Aquariums

 

Python 07F Male Connector

Python 07F Male Connector
Python Male Connector is designed for use with the Python No Spill Clean and Fill systems.

It replaces the male connector included with your No Spill Clean and Fill system.

 

Python 13B Faucet Pump

Python 13B Faucet Pump
This is a replacement T pump designed to be used with the Python No Spill Clean and Fill Systems.

The pump draws water from your tap to create the suction needed for syphoning.

It features an adjustable valve with drain and fill positions.

It must be used in conjunction with a plastic or brass tap adapter (sold separately)

Python 13B Faucet PumpAQ128403 4.99
Price Match
 

Python 13C On/Off Switch

Python 13C On/Off Switch
This replacement switch is designed for use with the Python No Spill Clean and Fill System. It joins the male and female connectors located near the gravel tube, and allows you to stop and start water flow as needed when cleaning your tank or refilling your aquarium. It also helps to prevent overfilling the tank.

Python 13C On/Off SwitchAQ128406 6.99
Price Match
 

Python 13A Two-Piece Faucet Adaptor

Python 13A Two-Piece Faucet Adaptor
This is the original 2-piece Python faucet or as we call it tap adapter that allows you to connect your Python No Spill Clean and Fill System to any standard tap.

Basically you install this adapter only if needed or leave it attached to your tap for more frequent use.

Its made from a solid plastic construction which ensures durability and long term use.

Its compatible with all Python water changing systems.

Python 13A Two-Piece Faucet AdaptorAQ13A 4.68
Price Match
 

Python 69A Universal Adapto

Python 69A Universal Adapto
If you've got one of those rather worn, damaged or non threaded taps then this is what you'll need.

The Universal Adapter is designed for this problem and works with the Python No Spill Clean and Fill system.

Either install when needed or just leave it attached to the tap for more frequent use.

Python 69A Universal AdaptorAQ128456 5.49
Price Match