V8 is a clear polyurethene sealer which when applied to concrete will both waterproof it, and prevent toxic substances leaching into the pond or water feature

V8 Pondseal does not require any primer and is ideal for new concrete ponds and water features, as well as re-sealing old concrete. The benefits of this product over other similar products includes quicker drying times, greater ease of use, increased coverage per litre, and a reduced applying time due to less coats being required.

Three coats are usually sufficient

Typical coverage is between 3 - 5 m² per litre, per coat

For a three coat application, 1 litre will therefore cover up to 1.3m²

G4 Pond Seal is a moisture cured polyurethane which forms a non-porous seal on concrete, brick or porous stone. G4 uses the moisture in the air and substrate to cure or harden, and it can be applied onto slightly damp substrates. However it is important that the substrate is sufficiently dry to be porous so as to enable the first coat of G4 to bond and obtain a mechanical grip.

G4 can be applied in poor weather conditions, high humidity and at temperatures down to 0 deg. C

G4 Clear :Three coats are normally sufficient
Normal coverage is 550 gm per sq.m (for the 3 coats)

G4 Green : 2 coats G4 Clear = 410 gm/sq.m (for 2 coats)

2 coats G4 Green = 400 gm/sq.m ( for 2 coats)

G4 Black : 2 coats G4 Clear = 410 gm/sq.m (for 2 coats)

2 coats G4 Black = 400 gm/sq.m ( for 2 coats)

G4 Blue : 2 coats G4 Clear = 410 gm/sq.m (for 2 coats)

2 coats G4 Blue = 400 gm/sq.m ( for 2 coats)