For best results clean all surfaces, to be free of grease, algae ect. Place sealer directly on to the surface you wish to bond/seal.

For bonding where there is movement (expansion & contraction) of different substrates, leave a minimum of 2mm thickness of bead width between surfaces.

Where there is livestock near the sealer protect from ingestion while curing. Full cure 24 hours, initial tack 2 – 3 hours.

Can be painted for up to 4 hours, if painting after this time then treat with acetone first.

Bonds all materials even underwater. Eg.

Shelf life 12 months if stored in dry conditions between 10° - 25°

For people who do not have a skeleton gun or the room to use one eg. in an aquarium etc.

An easy to use tape that seals leaking pipes.

Simply turn off water and clean area before applying a length of the instant repair tape around the pipe.

Once applied turn on water and check leak to ensure a good seal has been made. Repeat if necessary.

A section of rubber liner to cut and use as a patch over damaged areas of existing liners

Use with Gold Label Underwater Sealant (available separately) for a perfect watertight repair

280mm (11ins.) x 190mm (7.5in.)

For the repair of minor damage to PVC flexible liners.

Blagdon HDP (Heavy Duty Polyurethane) repair kit.

Blagdon HDP repair kit's main benefit is the ease with which you can repair accidental damage to flexible liners and preformed pools.

Pack contains a small section of butyl rubber repair tape approximately 23cm x 4cm and instructions

Suitable for use on H.D.P. Preformed pools, butyl and polyethylene liners

Not suitable for PVC liners

Butyl Joining Tape for joining two sections of butyl liner or patch repairs.

Cold Curing.