The most popular hose at present is the Black Vynaflex corrugated plastic hoses in a variety of sizes.


Can be bent in a fairly tight circle without kinking.


The 25mm(1ins.) hose fits straight on to most pond pump outlets and filter and UV unit inlets.

Available in the following sizes:

20mm : ¾ inch diameter
25mm : 1 inch diameter
32mm : 1¼ inch diameter
40mm : 1½ inch diameter

Anti Rust Coated

Available in 3 sizes

28-32mm : to fit 25mm (1 inch) hose

34-38mm : to fit 32mm (1 1/4 inch) hose

39-44mm : to fit 40mm (1 1/2 inch) hose

Standard type corrosion resistant band clips
Band width : 12mm
Socket and/or slotted screwdriver tightening screw

Use :

25-38mm clips for 25mm (1 inch) hose
30-40mm clips for 32mm (1 1/4 inch) hose
38-57mm clips for 40mm (1 1/2 inch) hose

Allows easy and convenient control of water flow to fountains, filters and waterfalls

Also allows connection of differing hose diameters

And allows for flow to be shut off and easy removal of filter components due to simple unscrewing of the hosetail union either side of the ball valve

Each removeable hosetail end has step-downs for the following hose diameters :

3/4" (19mm), 1" (25mm), 1 1/4" (32mm) and 1 1/2" (40mm)

Length Overall (with complete hosetails) : 36cms
Ball Valve : Length : 10cms : Diam : 6.5cms

Plastic : sizes to fit :

25mm (1in)
32mm (1.25in)

The Universal Flow Adaptor

Allows the connection of any combination of 13mm (½ inch) - 32mm (1¼ inch) piping

Unit is approx. 9 inches long.

The Universal Flow Adaptor

Allows the connection of any combination of 13mm (½ inch) - 32mm (1¼ inch) piping

Unit is approx. 9 inches long.

A set of two hosetails which can be screwed together to connect two lengths of hose.

Each hosetail will take 13mm (½"), 20mm (¾") or 25mm (1") hose, and you would then saw off the unused smaller connection

Best suited for joining 13mm (½") hoses as the internal bore is 13mm (½") maximum

This also allows you to join hoses of unequal diameters.

A set of two hosetails which can be screwed together to connect two lengths of hose.

Each hosetail will take 20mm (¾"), 25mm (1"), 32mm (1¼") or 40mm (1½") hose, and you would then saw off the unused smaller connection

Best suited for joining 20mm (¾") and 25mm (1") hoses as the internal bore is 25mm (1") maximum

This also allows you to join hoses of unequal diameters.

A set of two hosetails which can be screwed together to connect two lengths of hose.

Each hosetail will take 20mm (¾"), 25mm (1"), 32mm (1¼") or 40mm (1½") hose, and you would then saw off the unused smaller connection

Best suited for joining 32mm (1¼") or 40mm (1½") hoses as the internal bore is 40mm (1½") maximum

This also allows you to join hoses of unequal diameters.

A T-Connection piece which can be screwed together to connect three varying diameters of hose.

Each of the three hosetails will take 20mm (¾"), 25mm (1"), 32mm (1¼") or 40mm (1½") hose, and you would then saw off the unused smaller connections

Internal bore of connection is 40mm (1½")