These heaters are designed for use in outdoor ponds with fish in the winter season, when the surrounding temperature falls below 0 deg C. These high quality floating pond heaters keep an area of the pond surface around the heater float ice-free to allow oxygen exchange to take place, and to allow any poisonous gases to escape

The unit comes with :

Stainless Steel Heater : 360mm long (not adjustable) with 10 metres of mains cable

Stainless Steel Heater Guard : 320mm x 50mm diameter

Polystyrene Float

Plastic Domed Cover : 240mm diameter

Note : Heater must not be operated out of water. In the event of the unit overheating, an internal thermostatic switch will turn it off, and reset when temperature reduces

(The manufacturer gives no indication of minimum operating conditions, nor which heater wattage is most suitable for a specific application. Obviously the 300 watt unit will be effective at lower temperatures than the 150 watt unit. Previous, now discontinued, models from other manufacturers had a wattage of 125 watt )

Manufactured by AQUAEL in Poland

Designed to maintain a small ice-free area for oxygen exchange to take place in the pond, and for wildlife access to fresh water

The heater is made of Titanium, and is suitable for use in ponds, fresh and saltwater, and acid/aklaline water

Fitted with 10m of mains cable and UK 3-pin plug

Comes complete with float which allows small birds access to pond water, and recesses on the top where bird food can be placed

Also has thermal protection should heater not be immersed fully

Plastic netting complete with plastic securing pegs. BLACK : Mesh Size : approx 1 inch square

Available in 2 sizes:

4 x 3m
6 x 10m

Weather-resistant net for preventing pollution due to falling leaves and branches

Three sizes :

3 x 4 metres with 8 ground stakes

4 x 8 metres with 12 ground spikes

6 x 10 metres with 18 ground spikes