Namiba Terra ProtectoRep Clamp Lamp Holder : with mesh protector included
ProtectoRep Clamp Lamp holder with aluminium reflector and net protector completely eliminates the risk of direct contact between the animal and the spot bulbs, without a reduction in quality of light.
The 20cm (8in.) Diameter is suitable for all E27 screw thread bulbs up to 150w
The 25cm (10in.) Diameter is suitable for all E27 screw thread bulbs up to 250w
Comes complete with removable clip-on mesh protector and Safety Clamp for securing lamp holder to terrarium, and is fitted with a heat resistant insulated porcelain socket
Fitted with ES screw fitting only (will not accept bayonet bulbs)
Recommended for use with any of the 100w, 125w and 160w UV & Heat Lamps
After Care:
Should the lamp stop working or become intermittent, the lamp holder centre contact should be checked. This usually happens when the bulb has been over tightened.
Switch the power off and remove the plug from it's socket.
Remove the bulb and check that the centre metal contact is slightly raised. If it is flat against base it will need to be raised slightly to ensure proper contact with the bulbs centre contact
Add Namiba Terra ProtectoRep Clamp Lamp Holder 25cm Diameter £23.54
Clamp Lamp Holders
High quality, heavy gauge aluminum reflector.
Heat resistant insulated porcelain socket handles up to 250 watts.
Ideal for large "oversized" heat emitters, reflector spot lamps or infrared heat lamps.
Hang-up hook for easier suspension over terrarium.
Safety Clamp for securing lamp to terrarium (not shown).
Extra heavy gauge cord with switch and UK standard plug.
Fitted with ES screw fitting only (will not accept bayonet bulbs)
Recommended for use with the Power Sun, Hobby & T-Rex UV & Heat Lamps
After Care:
Should the lamp stop working or become intermittent, the lamp holder centre contact should be checked. This usually happens when the bulb has been over tightened.
Switch the power off and remove the plug from it's socket.
Remove the bulb and check that the centre metal contact is slightly raised. If it is flat against base it will need to be raised slightly to ensure proper contact with the bulbs centre contact.
For use in suspending metal dome or wire basket lamp fixtures (Great for use with a Repti Clamp Lamp, Economy Clamp Lamp or Brooder Lamp).
Two easily adjustable sizes to fit most standard terrariums.
Suspends heat fixtures that would otherwise be difficult to secure or use.
Helps prevent accidental knocking over or tipping of heat fixtures.
Special clips keep power cords secure and out of the way.
Solid coated steel construction. Adjustable knobs for height and length adjustment
Powersun UV Lamps : Use the Reptile Lamp Stand to vertically orient fixture and bulb. Self ballasted mercury vapour lamps must point straight down to prevent damage and premature burn outs
Small Reptile Lamp Stand LF-21 : Max Height 61cm (24") : Max Length 30.5cm (12")
Large Reptile Lamp Stand LF-20 : Max Height 91.4cm (36") : Max Length 38.1cm (15")
A highly reflective 20cm (8ins.) heat resistant ceramic lamp holder from Arcadia.
The Clamp Lamp comes complete with removable clip on mesh protector that completely eliminates the risk of direct contact between the animal and the spotlight bulbs. Also includes a safety clamp for securing the lamp holder to terrarium.
This lamp holder is suitable for use with E27 screw threaded bulbs up to 150w or recommended for use with any heat lamp up to a maximum of 160w.
Fitted with ES screw fitting only (will not accept bayonet bulbs)
After Care:
Should the lamp stop working or become intermittent, the lamp holder centre contact should be checked. This usually happens when the bulb has been over tightened.
Switch the power off and remove the plug from it's socket.
Remove the bulb and check that the centre metal contact is slightly raised.
If it is flat against base it will need to be raised slightly to ensure proper contact with the bulbs centre contact
Multi-directional clamp
Heavy gauge, highly reflective aluminium dome
Heat resistant ceramic fitting
Detachable protective mesh cover
In-line on/off switch
220 ~ 240V - 50/60Hz
Please Note: Lamps are not included with this product
For use when mounting compact lamps into vivariums. It consists of a Ceramic E27 Lamp holder mounted onto a black metal bracket, which either screw fits onto a wooden surface, or can be attached to a glass inner surface using self adhesive pads (not supplied)
The flexible bracket can be angled to direct the lamp.
The power lead incorporates a manual switch, and is complete with fitted plug
Also suitable for most other screw thread reptile bulbs except the Active UV Heat lamps
A moulded plastic body, with a highly reflective inner surface. The reflector surrounds the compact lamp, and focuses all of the lamp output in order to direct it where required - towards the bird or the reptiles, and as such maximising the performance of the lamp. A Plastic grill over the lamp prevents animals from making contact.
