Comes complete with :

230v Transformer : 24v output : 850 x 700 x 600 mm with 1.8 metres mains cable. : approx 29 watt

Mist Motor Unit : 38mm Ø : 25mm deep (45mm including water level sensor) : 1 metre LV cable.

The mist motor should be immersed to a minimum depth of 45mm. If the sensor on the motor comes above water level the mist motor will cease to operate. The unit will operate in depths between 5 - 30mm (of water above membrane). Water temperature should be between 5 - 35 deg. C but unit works more efficiently when water temperature and room temperature are the same.

The unit should be operated for not more than 8 hours per day to prolong the life of the membrane. Water consumption is approx. 90ml per hour.

The unit is virtually silent in operation.

Uses : 1 x Small membrane SMA 0009

Internal Mist Maker

For Lower water Levels

Comes complete with :

230v Transformer : 24v output : 850 x 700 x 600 mm with 1.8 metres mains cable: approx 29 watt.

Mist Motor Unit : 65mm x 40mm Ø : 20mm deep (32mm including water level sensor) : 1.5 metre LV cable.

The mist motor should be immersed to a minimum depth of 35mm. If the sensor on the motor comes above water level the mist motor will cease to operate. The unit will operate in depths between 5 - 30mm (of water above membrane). Water temperature should be between 5 - 35 deg. C but unit works more efficiently when water temperature and room temperature are the same.

The unit should be operated for not more than 8 hours per day to prolong the life of the membrane. Water consumption is approx. 90ml per hour.

The unit is virtually silent in operation.

Uses : 1 x Large Membrane SMA 0019

Membrane : SMA 0009

Comes complete with :

230v Transformer : 24vac (1.25A) & 12vac (1.2A) output : 850 x 700 x 600 mm with 1.8 metres mains cable. : approx 40 watt rated power

Mist Motor Unit : 38mm Ø : 25mm deep (45mm including water level sensor) : 1 metre LV cable.

Light Unit : 40mm Ø : 20mm deep. Lamp : 12vac 10watt Do not operate the light unit out of the water

The mist motor should be immersed to a minimum depth of 45mm. If the sensor on the motor comes above water level the mist motor will cease to operate. The unit will operate in depths between 5 - 30mm (of water above membrane). Water temperature should be between 5 - 35 deg. C but unit works more efficiently when water temperature and room temperature are the same.

Replacement Membrane SMA 0009

38mm diameter
45mm high
24v ac
29 watt
Water Usage : 70mlph
1.8m cable

Membrane : SMA 0009

Membrane : SMA 0019

Comes complete with :

230v Transformer : 24vac (1.25A) output : 850 x 700 x 600 mm with 1.8 metres mains cable. : approx 36 watt rated power

Mist Motor Unit : 40mm Ø : 25mm deep (50mm including water level sensor) with 3 built in clear lights : 1 metre LV cable.

The mist motor should be immersed to a minimum depth of 45mm. If the sensor on the motor comes above water level the mist motor will cease to operate. The unit will operate in depths between 5 - 30mm (of water above membrane). Water temperature should be between 5 - 35 deg. C but unit works more efficiently when water temperature and room temperature are the same.

The unit should be operated for not more than 8 hours per day to prolong the life of the membrane. Water consumption is approx. 80ml per hour.

The unit is virtually silent in operation.

Uses : 1 x Large Membrane

Comes complete with :

230v Transformer : 24vac (1.2A) output : 850 x 700 x 600 mm with 1.8 metres mains cable. : approx 36 watt rated power

Mist Motor Unit : 40mm Ø : 25mm deep (50mm including water level sensor) with 3 built in yellow lights : 1 metre LV cable.

The mist motor should be immersed to a minimum depth of 45mm. If the sensor on the motor comes above water level the mist motor will cease to operate. The unit will operate in depths between 5 - 30mm (of water above membrane). Water temperature should be between 5 - 35 deg. C but unit works more efficiently when water temperature and room temperature are the same.

The unit should be operated for not more than 8 hours per day to prolong the life of the membrane. Water consumption is approx. 80ml per hour.

The unit is virtually silent in operation.

Uses : 1 x Large Membrane

The Water Guard is to be used with the Internal Mist Motors. It prevents water from splashing out of the ornament / water feature that the Mist Motor is placed in, which occurs as a result of the diffusing action of the mister.

Replacement membranes for all our mist makers

SMA 0009 : Small Membrane : 20mm total diameter including seal (17mm as in packet): 14mm diameter viewable when fitted

SMA 0019 : Large Membrane : 25mm total diameter including seal : 18mm diameter viewable when fitted

The above are Sold Singly : comes complete with removal tool

Large Membranes also available in 3 and 5 sets complete with removal tool