NEW

POWER GRAVEL CLEANER

from Aquarium Systems

It is provided with a Foam Cartridge consisting of a series of inclined planes to which dirt clings. This system allows the user to easily eliminate dirt by just removing and cleaning the foam cartridge. The cartridge is washable and re-usable.

The Power Gravel Cleaner is suitable for all kinds of aquarium, where it is possible to hang it on the wall of the tank. It can also be used on aquariums where the rim of the tank is thicker than the bracket, by partially fitting the bracket ; but the unit must be secure prior to use.

Dimensions:

Motorised Filter Unit: Length : 150mm. Height : 150mm.

Depth (front to back from rim of tank) : 75mm.

Motor: 220-240V : 6w : 400 lph.

Gravel Cleaner Tube : Diameter : 45mm. Length : 350mm. Hose Length : 800mm.

Removes trapped debris and waste from aquarium gravel.

Does not disturb fish.

Incorporates a gravel strainer and includes an "on/off" syphon tap.

Self-starting de-luxe gravel cleaner.

Includes "on/off" syphon tap.

The new Eheim Gravel Cleaner is the perfect tool for convenient and safe cleaning of the aquarium floor when changing part of the water at the same time.

The new version has a number of new functions and fittings which improves the range of applications and safety and user convenience

Cleans gravel during regular water changes.

Smaller diameter removes debris gently.

For aquariums up to 10 gallons.

Unit comes with 1/2" adaptor attached.
1/4" Adaptor is also included which can be snapped into position in place of the 1/2" hose adaptor

Unit can be easily dismantled for cleaning in case of clogging

Attach gravel tube hose end to the Squeeze Siphon Starter and insert gravel tube into the aquarium

Making sure the Squeeze Siphon Starter bulb is outside but below aquarium water level, squeeze the bulb 1-2 times until water starts flowing

A-1060 Marina Easy Clean Gravel Cleaner - Mini

A-1061 Marina Easy Clean Gravel Cleaner - Regular - 10"

Hagen A-1062 Marina Easy Clean Gravel Cleaner - 15"

A1063 Marina Easy Clean Gravel Cleaner - 24"

Carrying out partial water changes in the aquarium and ensuring that you remove any debris that has collected on the gravel can be quite awkward unless you use a Tetra HydroClean Gravel Cleaner.

This simple piece of equipment allows you to remove debris from the gravel without it ever having to leave the aquarium by siphoning off the debris leaving the gravel in place.

At the same time it also allows you to carry out a partial water change simply, quickly and safely. With its patented self-start action it also means an end to potentially harmful mouths of water when starting a siphon system.

Available in three different models, a Tetra HydroClean gravel cleaner is available for any sized aquarium.

GC30 : for 20 - 60 litre tanks : supplied with 150 cm of hose
GC40 : for 50 - 200 litre tanks of standard depth : supplied with 180 cm of hose
GC50 : for 50 - 400 litre tanks of greater depth : supplied with 180 cm of hose.

Designed to separate debris from the gravel and remove it from the aquarium while performing routine water changes.

The wide-mouth nozzle increases surface coverage by about 20% allowing you to clean more surface area using less water and reducing cleaning time.

Now with self-start feature.

Gravel Cleaner is : 10 ins long : 2 ins diameter : 56 ins of hose.

Designed to separate debris from the gravel and remove it from the aquarium while performing routine water changes.

The wide-mouth nozzle increases surface coverage by about 20% allowing you to clean more surface area using less water and reducing cleaning time.

Now with self-start feature.

Gravel Cleaner is : 16 ins long : 2 ins diameter : 72 ins of hose.

Designed to separate debris from the gravel and remove it from the aquarium while performing routine water changes.

The wide-mouth nozzle increases surface coverage by about 20% allowing you to clean more surface area using less water and reducing cleaning time.

With self-start feature.

Gravel Cleaner is : 24 ins long : 2 ins diameter : 96 ins of hose.

Designed to separate debris from the gravel and remove it from the aquarium while performing routine water changes.

The wide-mouth nozzle increases surface coverage by about 20% allowing you to clean more surface area using less water and reducing cleaning time.

Now with self-start feature.

Gravel Cleaner is : 24 ins long : 2 ins diameter : 96 ins of hose.

The standard Python No Spill Clean & Fill System comes with a 10" gravel tube as standard.

But for larger and/or deeper tanks the following extended length gravel tubes are available as accessories.

All gravel tubes are packaged with 2 feet of tubing and a female connector.