All our misters come complete with transformer and include low water level cut-outs.

In deeper water a float can be used to maintain the correct depth of water, to ensure maximum performance from the mister

Ceramic membranes can be easily changed and should have a life of 5-8000 working hours

Will fit Float : SMA 1109
Membrane : SMA 0019

Will fit Float : SMA 1109
Membrane : SMA 0009

Will fit Float : SMA 1109
Membrane : SMA 0009

Comes complete with :

230v Transformer : 24v AC output : 140 x 85 x 70 mm with 1.8 metres mains cable. : rated 105 watt.

Mist Motor Unit : 70mm Ø : 30mm deep (60mm including water level sensor) : 10 metre LV cable.

The mist motor should be immersed to a minimum depth of 30mm. If the sensor on the motor comes above water level the mist motor will cease to operate. The unit will operate in depths between 60 - 70mm (of water above membrane). Water temperature should be between 5 - 35 deg. C

The unit should be operated for not more than 8 hours per day to prolong the life of the membrane. Water consumption is approx. 240ml per hour.

The unit is virtually silent in operation.

Will fit Float : SMA 1119
Membrane : SMA 0039

Will fit Float : SMA 1119
Membrane Set : SMA 0039

Will fit Float : SMA 1119
Membrane Set : SMA 0039

External Mist Maker

Comes complete with :

230v Transformer : 42v DC output : 160 x 150 x 110 mm with 1.8 metres mains cable. : rated 200 watt. Complete with power on/off switch, power on light, and cooling fan

Mist Motor Unit : 85mm Ø : 25mm deep (60mm including water level sensor) : 10 metre LV cable.

The mist motor should be immersed to a minimum depth of 30mm. If the sensor on the motor comes above water level the mist motor will cease to operate. The unit will operate in depths between 60 - 70mm (of water above membrane). Water temperature should be between 5 - 35 deg. C

The unit should be operated for not more than 8 hours per day to prolong the life of the membrane. Water consumption is approx. 400ml per hour.

The unit is virtually silent in operation.

Will fit Float : SMA 1129
Membrane Set : SMA 0059

230v Transformer :  42v DC output : 160 x 150 x 110 mm with 1.8 metres mains cable. : rated  200 watt. Complete with power on/off switch, power on light, and cooling fan

Mist Motor Unit : 85mm Ø : 25mm deep (60mm including water level sensor) : Built in 42v DC 10watt Quartz clear bulb : 10 metre LV cable.

The mist motor should be immersed to a minimum depth of  30mm. If the sensor on the motor comes above water level the mist motor will cease to operate. The unit will operate in depths between 60 - 70mm (of water above membrane). Water temperature should be between 5 - 35 deg. C

The unit should be operated for not more than 8 hours per day to prolong the life of the membrane. Water consumption is approx. 400ml per hour.

The unit is virtually silent in operation.

Will fit Float : SMA 1129
Membrane Set : SMA 0059

Will fit Float : SMA 1139
Membrane Set : SMA 0099

Will fit Float : SMA 1159
Membrane Set : SMA 0069

Replacement membranes for all our mist makers

SMA 0009 : Small Membrane : 20mm total diameter including seal (17mm as in packet): 14mm diameter viewable when fitted

SMA 0019 : Large Membrane : 25mm total diameter including seal : 18mm diameter viewable when fitted

The above are Sold Singly : comes complete with removal tool

Large Membranes also available in 3 and 5 sets complete with removal tool

The Mist Motor External Floats are the ideal solution to ensure the correct depth of water is maintained over the mister in deeper waters, where levels can alter.

Refer to the individual Mist Maker catalogue reference for Float application