This reactor is suitable for marine systems from 40 to 140 UK gallons (180 to 630 litres)

An additional CO² system (not supplied) is required to operate this unit.

Comes complete with an Aquabee UP500 fluidisation pump, and Rowa Lith C+ Calcium Media.

Unit is approx 130mm diameter, and 490mm high

Designed for use as a hang-on reactor, or can be used free-standing in a sump

Top of the reactor must be above water level for the return to work

Height : (to top of hosetails): 440mm
Base footprint : 130 x 130 mm
Circular Column Diam : 90mm
Top Plate with hang-on bracket : 130 x 160 mm

Can be used for a multitude of filter media, such as phosphate remover and activated carbon simultaneously.

The mid-section divider can be adjusted to suit differing quantity of media, or simply removed to allow extra capacity in single medium application.

Can also be used as a single reactor by the removal of the upper sponge.

Designed for use as a hang-on reactor, or can be used free-standing in a sump

Top of the reactor must be above water level for the return to work correctly

Height : (to top of hosetails): 440mm
Base footprint : 130 x 130 mm
Circular Column Diam : 90mm
Top Plate with hang-on bracket : 130 x 160 mm

The PhosBan Reactor 150 is designed with the upflow principle to achieve the most efficient use of PhosBan™ or other chemical filter media.

By pushing water from the bottom upward through a dispersion plate, it forces an even distribution of water through the media, which fluidises media, increases contact efficiency and prevents channeling.

It can be mounted hanging on the back of the aquarium or below the aquarium. Hose barb connections are for 1/2 inch i.d. tubing. Includes 1/2 inch barbed ball valve for flow control, and 4 hose clamps.

Recommended flow rate is 80 to 90 gallons per hour.

Height : 360mm (to top of hose connectors)
Diameter : 80mm

Suitable for aquariums up to 567 litres (150 US Gallons)

For larger aquariums use additional reactors