The system comprises :

An Aquarium Computer with digital read-out which has connections for a pH probe (Dupla or JBL etc)(not supplied with this unit) , a temperature sensor (supplied) and a LAN connection and lead for connecting to the 6-way socket block

A 6-way socket block with UK 3 pin sockets and mains cable

Cable Tidy : Has 2 switched connections, usually used for lights and pump, and another for either a seperate heater and seperate thermostat, or for a combined heater/thermostat (as most are these days)

And of course, the mains power supply in

Complete with self adhesive mounting pads, and instruction leaflet

Keeps wiring clutter to a minimum, and is straightforward to install.

However : if you are in doubt as to how to connect, then you should consult a qualified electrician

Algarde Power Centre allows you to connect several aquarium appliances into a single box.

Has two switched connections and a "mains on" light

Also has two unswitched connections, one of which can be used for a combined heater/thermostat or separate heater and thermostat, and the other for any other device

Natural Wave Multi-Cycle Pump Timer Wave Maker from Aquarium Systems : the MaxiJet people

Alternating water currents created by the pumps and powerheads plugged into Natural Wave™ mimic actual wave patterns in the ocean, stimulating live corals and providing a more realistic aquatic environment.Varying water circulation can help reduce dead spots and help keep detritus in suspension,allowing it to be more easily captured by filters.

Natural Wave™ has 3 outlets with adjustable frequency – change duration of cycles from 20 seconds to 3 minutes.

Natural Wave™ also has 1 standard power outlet – so that accessories like lights, filters,or heaters may be plugged into the same outlet strip.

Natural Wave™ multi-cycle pump timer is affordable and economical.

Please Note : Image shown is of US version : UK model has same socket block but with 1 standard UK 3-Pin permanent socket and 3 standard UK 3-Pin variable timed sockets.

Complete with 1.5 metres of mains cable & standard UK 3-Pin plug. Unit also has safety overload protection

Timed sockets 1 & 2 : On/Off operating cycles adjustable from 20 seconds to 3 minutes : and output alternates between Socket 1 and 2 (i.e. when Outlet 1 is on : Outlet 2 is off)

Timed socket 3 : On/Off operating cycle is double : from 40 seconds to 6 minutes

Please note that any cycle timing setting will affect all three timed outlets : they cannot be set individually

Dimensions : 360mm x 60mm x 40mm.

For appliances up to 3KW (Max 13A)

15 minute interval setting

Suitable for 230-240V 50Hz AC mains

Simple to operate and set

Simply push down all the time selector segments for the period you want the timer-controlled appliance to be active (ON)

Instant ON override switch

Plug in adaptor that allows equipment fitted with European Schuko plug to be used in a UK mains outlet.

Made of heavy duty rubber material.


Voltage: 240V 50Hz
Fuse: 5A