Blagdon™ Pond Paint
Waterproofs and Seals New Concrete Ponds

Features Acrylic Waterproofer and sealer for concrete ponds, waterfalls and water features. 2-3 coat application - no primer required. Quick drying and easy to apply. High Surface Coverage. Completely non-toxic to all aquatic life. Excellent for repairing cracks in concrete, as well as waterproofing and sealing. Available in a variety of colours.

Surface Preperation Untreated Concrete. Concrete must be clean, dry and fully cured. Remove any efflorescence or laitance. Previously Painted Surfaces. If you have an existing pond that needs resealing or repainting Blagdon recommend Blagdon V8 Pondseal Blagdon no longer recommend this paint for overpainting previously painted surfaces because they could not guarantee that the new coating would adhere to the previous one. However, the acrylic paint is the same as originally, so if proper preparation on the coating is carried out then it should be possible to successfully overcoat with new paint. Remove all loose, flaking material and ensure existing coatings are sound and firm.  Ensure previous surface is rubbed down to ensure a good adhesion surface Please be aware that neither Blagdon nor ourselves actually recommend this use of Blagdon Pond Paint : and therefore we will entertain no warranty claims  if used in this way

Application Stir thoroughly before use. Bare concrete should be sealed with an initial coat of pond paint thinned with 10% water. Leave to dry for 2-3 hours. Apply 1 or 2 full coats depending on the quality of concrete finish.

Coverage Approximately 4 to 6 m² per litre. Coverage will depend on texture, porosity etc.

Drying Time at 20°C Touch Dry : 30 - 40 minutes. Firm Dry : 2-3 hours. Overcoat : 2-3 hours

Warnings & Cautions Do not apply in wet or humid conditions. Protect from rain for at least 7 days. If swallowed : seek medical attention.