| | |
 | Noma Pond Lights 2 Set
2 Light Low Voltage (12v) Unit manufactured in black anodised aluminium. Safe for use in water or above ground. Powerful 20 watt halogen lamps with dichroic reflector. Complete with interchangeable coloured lenses, and Moonrays outdoor rated Control Unit
Coloured Lenses supplied : 1 each of : Green RedYellow and Blue
Moonray Control Unit: an advanced transformer/control unit with built in:
Light sensor: Switches lights on and off automatically day in, day out
Timer: Sets the number of hours the lights will stay on after the light sensor switches them on automatically at dusk. This can be consumer set to switch off between 1 and 9 hours by pressing one button.
Manual On/Off Button: Will over-ride the automatic feature to turn the lights on or off anytime day or night.
Consumer Re-Settable Circuit Breaker/Thermal Fuse: This protects the transformer against overheating or overload. The re-set button is on the underside of the unit
Rated to IP24 : The control unit can be sited outdoors and is supplied with 1.5 metres of mains cable and BS approved mains plug
|
|
|
Oase Lunaqua 2 Underwater Lights
The Oase Lunaqua 2 is a small halogen underwater light, capable of generating an intense beam of light at low power consumption. The beam can be varied from a large spotlight to a small point beam. A stake is included allowing the unit to be used as a garden light. Voltage : 12v / 50hz Power Consumption : (watts) : 20 each light The Lunaqua 2 Set 2 : includes : 2 Lunaqua underwater lights : 2 stakes : 2 Brackets for connecting lights: 1 Safety transformer : 2 x 5mtr Cable The Lunaqua 2 Set 4 : includes : 4 Lunaqua underwater lights : 4 stakes : 4 Brackets for connecting lights : 1 Safety transformer : 4 x 5mtr Cable The standard lights are clear in colour, but special colour lenses are available in sets of 5 : This is a very high quality product
|  |
|
|
 | Oase Lunaqua 2 Special Colour Lenses
Sets of 5 special colour lenses for fitting over the clear lenses. Now only available in a set of 5 mixed colours.
|
|
|
Pond & Water Feature Mist Makers
STOWASIS MISTERS
These Mist Motors actually produce real mist!
Complete with transformer and low water level
safety cut-out, they add a touch of mystery to any water feature, pond or
garden
|  |
|
|
 | SMG 0119 External 3 Membrane Mist Maker
Comes complete with :
230v Transformer : 24v AC output : 140 x
85 x 70 mm with 1.8 metres mains cable. : rated 105 watt.
Mist Motor Unit : 70mm Ø : 30mm deep (60mm
including water level sensor) : 10 metre LV cable.
The mist motor should be immersed to a minimum depth
of 30mm. If the sensor on the motor comes above water level the mist motor
will cease to operate. The unit will operate in depths between 60 - 70mm (of
water above membrane). Water temperature should be between 5 - 35 deg. C
The unit should be operated for not more than 8 hours
per day to prolong the life of the membrane. Water consumption is approx. 240ml
per hour.
The unit is virtually silent in operation.
|
|
|
SMG 0129 External 5 Membrane Mist Maker
External Mist Maker
Comes complete with :
230v Transformer : 42v DC output : 160 x
150 x 110 mm with 1.8 metres mains cable. : rated 200 watt. Complete with
power on/off switch, power on light, and cooling fan
Mist Motor Unit : 85mm Ø : 25mm deep (60mm
including water level sensor) : 10 metre LV cable.
The mist motor should be immersed to a minimum depth
of 30mm. If the sensor on the motor comes above water level the mist motor
will cease to operate. The unit will operate in depths between 60 - 70mm (of
water above membrane). Water temperature should be between 5 - 35 deg. C
The unit should be operated for not more than 8 hours
per day to prolong the life of the membrane. Water consumption is approx. 400ml
per hour.
The unit is virtually silent in operation.
|  |
|
|
 | SMG 0309 External 5 Membrane Mister & Light
External Mist Maker
Comes complete with :
230v Transformer : 42v DC output : 160 x
150 x 110 mm with 1.8 metres mains cable. : rated 200 watt. Complete with
power on/off switch, power on light, and cooling fan
Mist Motor Unit : 85mm Ø : 25mm deep (60mm
including water level sensor) : Built in 42v DC 10watt Quartz clear bulb : 10 metre LV cable.
The mist motor should be immersed to a minimum depth
of 30mm. If the sensor on the motor comes above water level the mist motor
will cease to operate. The unit will operate in depths between 60 - 70mm (of
water above membrane). Water temperature should be between 5 - 35 deg. C
The unit should be operated for not more than 8 hours
per day to prolong the life of the membrane. Water consumption is approx. 400ml
per hour.
The unit is virtually silent in operation.
|
|
|
External Mist Maker Floats
The Mist Motor External Floats are the
ideal solution to ensure the correct depth of water is maintained over the
mister in deeper waters, where levels can alter.
Float SMA 1119
is designed to accommodate the Small 3 Membrane External Mist Motor (SMG 0119)
Float SMA 1129 is
designed to accommodate the Medium
5 Membrane External Mist Motors (SMG 0129 & SMG 0309
|  |
|
|
 | Mist Maker Replacement Membranes
Replacement membranes for all our mist makers
Small Membrane : 20mm total diameter including
seal : 14mm diameter viewable when fitted
Large Membrane : 25mm total diameter including
seal : 18mm diameter viewable when fitted
Sold Singly : comes complete with removal tool
|
|
