HAGEN introduces the new Double Glo Fluorescent Light Control Units
Will run two lamps from one unit
Double Glo uses a state-of-the-art electronic ballast for cool, quiet application.
They have water-resistant end-caps, preventing damage caused by moisture or splashing water. The conveniently located mounting bracket permits safe and neat placement of the ballast. By mounting the unit externally, away from the bulbs, there is a reduction of heat build-up commonly associated with conventional canopies. The control unit can be used with or without an external timer, making it possible for complete control of any lighting system.
single control unit to run two fluorescent lamps, each one the same wattage as
marked on the unit.
The wattage shown is the
wattage of each of the two lamps that can be fitted to the unit, i.e. Glomat 2
20W will take 2 x 24" 20w fluorescent lamps
To fit 1 inch (26mm) diameter fluorescent tubes only
Please note the correct connection of the lamp leads
as shown on the control unit outer casing. If you connect both leads from one
end of the unit to either end of the same tube, the tube will just flash on
start up and not light.