NEW :
ASL T5 Aluminium Overtank Light Units
These professionally manufactured units are designed to
sit on the tank glass ends supported by the two fully adjustable plastic
brackets. The support brackets can be moved within their grooves to allow
accurate attachment to the tank end glass. These units do not have any tilt to
access facility, but have to be lifted off the tank to allow access
They come complete with :
- Built in starter/choke units
- Fittings for 2 or 4 compact tubes depending on model
- Separate switches for each tube
- 1.5 metre mains lead with UK standard 3-pin plug
- Splash protection light tube cover
- Built in reflector
Compact T5 tubes are not included but
units can be fitted with any combination of Compact T5 tubes of the
corresponding wattage (Purchased separately)
PR45cm 2 x 18w : Unit is 450mm total length, but brackets
will extend to fit 530mm. Light emitting panel is 250mm x 93mm and is centrally
located on the underside of the unit
PR60cm 2 x 36w : Unit is 600mm total length, but brackets
will extend to fit 640mm. Light emitting panel is 350mm x 93mm and is centrally
located on the underside of the unit
PR90cm 2 x 55w : Unit is 900mm total length, but
brackets will extend to fit 940mm. Light emitting panel is 590mm x 93mm and is
centrally located on the underside of the unit
PR120cm 2 x 36w + 2 x 55w : Unit is 1200mm total
length, but brackets will extend to fit 1250mm. Light emitting panel is 920mm x
93mm and is centrally located on the underside of the unit
PR150cm 4 x 55w : Unit is 1500mm total length,
but brackets will extend to fit 1550mm. Light emitting panel is 1210mm x 93mm
and is centrally located on the underside of the unit